eXtremeRate Scarlet Red Real Metal Buttons (RMB) Version Rise 2.0 Remap Kit for PS5 Controller BDM 010 BDM 020, Upgrade Board & Redesigned Back Shell & Programable Back Buttons Set for PS5 Controller

what our customer say this product:

Powered by

1. Kiczek997 Verified Buyer – 18 September 2024

   Produkt zgodny z opisem, bardzo dobre wykonanie przycisków (przyciski jak i obudowa z metalu) reszta również bez zastrzeżeń, czyli taśmy i układy. Prostota montażu. Trzeba bardzo zwrócić UWAGE, jak obciąć i wygiąć taśmę od przycisków L i R, Na filmiku na YouTubie wszystko jest jasno pokazane. Pada rozbiera i składa się bardzo łatwo więc nie ma stresu, że coś pójdzie nie tak. Polecam, bo mnie bardzo brakowało tych przycisków po przesiadce z NACON Revolution Unlimited PRO do Ps4. Programowanie bardzo proste i bezproblemowe. Podsumowując, dobra jakość, wszystko dobrze zapakowane, palce super się układają na przyciskach, bezproblemowe działanie. Jedynie kolor tylnej obudowy trzeba sobie dobrać, bo niestety tu jest śnieżna biel, a pad od ps5 jest trochę szarawy.
   

2. Shaun Verified Buyer – 14 November 2024

   A must have mod for anyone who enjoys shooters. I went the full route and did the soldering instructions because I only wanted to program my L3 and R3 buttons for running and sliding in certain games and the directions provided made it absolutely easy. While I do have a lot of experience with opening electronics and repairing/modding them I feel that the way everything is laid out for you makes this easy enough that even a novice could successfully install this. The buttons and the case-back are top notch quality that you would expect from eXtremeRate per usual and the addition of using metal not only makes the triggers much more durable, it also gives them an extremely premium and solid feel. The kit does add a considerable amount of weight but after using it for a few days you slowly get used to it. Only issue I ran in to with this kit was the triggers have a jiggle to them which annoyed me to no end, especially when the vibrations started because the jiggle would then turn in to a loud buzzing noise. The solution I found for this (thanks to a rep from eXtremeRate on the subreddit) was to place a single layer of tape underneath where the inside of the trigger rests inside the housing beneath the circuit board. I used black electrical tape (and you cannot even see the tape at all once everything is closed up so color doesn’t matter) and immediately resolved the issue. Now the paddles are very solid, have zero “play” in their movement, and do not rattle when the controller vibrates. Heads up to anyone buying this mod who uses a charging station that docks the controller right side up; your controller will not fit in that dock anymore. I found an “upside down” charging station that comes with a usb insert for the top of the controller and it works beautifully.

   

3. Jeff Verified Buyer – 21 December 2024

   I had the official Sony back buttons on my PS4 controller, and I loved them. I finally got a PS5, but there isn’t an equivalent controller attachment available from Sony. I did some research and found a lot of positive information about this product. I was a little worried because I have no experience with taking apart and tinkering with electronics. But I took the chance, and I’m glad I did.

   The installation was a little challenging, for me at least. But the instructional video on YouTube is very thorough. It took me about 2 hours to go through it methodically, but I got it done and it works perfectly. The paddles feel great. I like them even better than the official Sony PS4 paddles.

   Long story short, the installation is difficult if you don’t have any experience, but it’s doable, and definitely worth the effort.
   

4. Omasu Verified Buyer – 14 January 2025

   Installation wasn’t an issue – followed a YouTube video and I had it installed in 30-40 minutes. Used the paddles for about a month after that the X button on my controller stopped working. Now Im out $50 that I spent on these extreme panels and I need a new controller.

   Would not recommend.
   

5. Suraj Verified Buyer – 27 January 2025

   Pretty good if you can’t afford pro controllers but for me the back paddles are clicky some times you accidentally click it and back paddles are little lose.
   

6. Narinder Virk Verified Buyer – 1 March 2025

   100% worth it for the price. The metal paddles won’t snap like the plastic ones. I recommend getting a textured back if you tend to sweat while gaming. I’ve been using them for about 2 weeks and no issues at all. The durability is amazing and it feels like they’ll never break. The customer service is incredible as well, in case you run into any problems. The paddles got delivered to me in 2 days! The installation isn’t hard at all as long as you follow a YouTube tutorial.
   

7. GeroniMOE Verified Buyer – 16 March 2025

   No soldering, a little bit of a hassle to install, but the end results are epic. You’re basically getting a “Pro” controller for dirt cheap. The only gripe I have with this device is the center mode button rattles a bit. The build is mostly metal including the panels, which gives a nice tactile click.

   

8. Francois Verified Buyer – 19 March 2025

   Great product, I found that with an average level of competence and the aid of YouTube you would be able to install this. However, I still have the install star a 1 because, honestly most people would f* this up so bad. It’s not the manufacturers fault it’s, PlayStation’s. But in the end, it’s not super easy, at least not as easy as the stick it on/turn it on mods that you could get with the PS4.

   I would just like to end, if this wasn’t clear. The product and end result is fantastic!
   

9. Ryon T Harris Verified Buyer – 21 March 2025

   So I’ve had the original plaatic back buttons installed for about 5 months and since then the plastic buttons had broken twice. It was a clear design flaw. This metal kit fixes that issue completely and is absolutely worth your money. These are sturdy and have a nice tactile click to them. For new buyers, install is a breeze unless you want to remap the R3, L3, and touchpad…then it will need a little soldering. But for me I don’t have any need to remap those. If you already have the plastic kit installed these fit right in place….except the metal back plate. I couldn’t get it to fit over the original so I just used the original plastic one instead of reinstalling everything. Do not buy the plastic kit and absolutely purchase this one.

   

10. J k Verified Buyer – 7 April 2025

    Excellent customer service was very helpful. Setup isn’t too difficult using instructions. Adds some weight and heft to controller but feels solid and reliable. The overall grip and effectiveness versus the price make it worthwhile. I’ve been using for well over a year and the pair i purchased have held up well. A+
    

11. David Osborne Verified Buyer – 9 April 2025

    Already purchased a couple more.