NexiGo PS5 and PS5 Slim Wall Mount Kit with Charging Station, Dual Controller Chargers, Steel Wall Stand, and Headphone Hanger – Compatible with PlayStation 5 (Disc & Digital)

what our customer say this product:

Powered by

1. Jennifer Walters Verified Buyer – 1 March 2024

   This product is easy to use and install. It mounts directly to your PlayStation to make sure the PlayStation doesn’t fall off. Make sure you find a stud to adhere it to so it guarantees to hold it. It looks nice under my son’s tv and has freed up space by putting it on the wall.
   

2. John Cronin Verified Buyer – 16 April 2024

   Was on time everything works accordingly nothing was damaged and a very easy install
   

3. Anonymous Verified Buyer – 10 May 2024

   Quality product. Quite sturdy using only the supplied drywall anchors. PS5 DualSense Edge controller users: Like 99% of controller docks, this one doesn’t work by default. That said; I opened it up and determined the plastic to be thick enough to do make this work (though I do not take responsibility if you damage your unit): 1. Set DualSense Edge in the dock lined up with the aux-in port (which should be long enough to help you center it). Mark where the front edge of the L3,R3 “function” buttons are making contact with the dock and preventing the controller from seating on the charge pins. 2. Use a dual purpose (flat-round profile) needle nose file to remove ~1-2mm of plastic from the marked spot, tapering it in towards the base. If you do this right and use a soft touch it will look factory mint (or at least close) and the plastic is quite easily filed. (see image) I should have taken a picture with the charging base open, but the worst damage you will do is blow a small hole in the plastic if you stick to the side edges. Stop and test fit at regular intervals and stop when the controller seats well and charges so you don’t blow a hole through the plastic inadvertently. The only electronics in the immediate area is a small square circuit board no bigger than the charging pin base is wide sitting right below the pins, the rest is structural bracing (plastic) and open space (air). I am ecstatic to get my DualSense Edge (and its case) off my desk, in order to embrace a simpler, more organized workspace (and life).

   

4. Ryan Verified Buyer – 26 June 2024

   Easy to install. Extra screws allowed me to also mount headset. Looks clean and the charger works well.

   

5. Sergio Verified Buyer – 4 December 2024

   Un soporte sólido que combina muy bien con la consola y los Dual Sense. Hay que seguir las instrucciones de colocación tal como están en el manual, queda bien ajustado y no da la sensación de que se va a caer. Un detalle es que la caja sigue el formato de la caja oficial de la Playstation 5, con los bordes azules. Por un momento pensé que se trataba de un producto oficial. No he probado los cargadores, aunque personalmente prefiero cargar los Dual Sense desde el cable oficial. Tiene orificios de refrigeración por la parte inferior, lo cual también me inspira confianza de que no se va a sobrecalentar la consola. Lo recomiendo, es un producto de calidad.
   

6. Den_David Verified Buyer – 3 January 2025

   Beste product dat ik ooit gekocht heb . Stevig , veilig en opladen in 1 . Oplaadstation haakt en is geschroefd aan beugel , ps is geschroefd aan beugel . Heb wel mijn eigen schroeven gebruikt voor aan de muur te schroeven maar ik heb alleen maar lof voor dit product . Ik vind ook dat het een eerlijke prijs is naar duurzaamheid en gebruikersgemak .
   

7. Elizeth Verified Buyer – 13 January 2025

   Bien
   

8. Anonymous Verified Buyer – 16 February 2025

   Quality product. Quite sturdy using only the supplied drywall anchors. PS5 DualSense Edge controller users: Like 99% of controller docks, this one doesn’t work by default. That said; I opened it up and determined the plastic to be thick enough to do make this work (though I do not take responsibility if you damage your unit): 1. Set DualSense Edge in the dock lined up with the aux-in port (which should be long enough to help you center it). Mark where the front edge of the L3,R3 “function” buttons are making contact with the dock and preventing the controller from seating on the charge pins. 2. Use a dual purpose (flat-round profile) needle nose file to remove ~1-2mm of plastic from the marked spot, tapering it in towards the base. If you do this right and use a soft touch it will look factory mint (or at least close) and the plastic is quite easily filed. (see image) I should have taken a picture with the charging base open, but the worst damage you will do is blow a small hole in the plastic if you stick to the side edges. Stop and test fit at regular intervals and stop when the controller seats well and charges so you don’t blow a hole through the plastic inadvertently. The only electronics in the immediate area is a small square circuit board no bigger than the charging pin base is wide sitting right below the pins, the rest is structural bracing (plastic) and open space (air). I am ecstatic to get my DualSense Edge (and its case) off my desk, in order to embrace a simpler, more organized workspace (and life).

   

9. Nicole H. Verified Buyer – 9 March 2025

   Die Wandhalterung war einfach zum montieren. Die Schrauben wirken recht klein, weshalb wir skeptisch waren, jedoch hält es bisher einwandfrei. (Haben die Halterung seit ein paar Monaten, hoffe es bleibt stabil). Die Ladefunktion bei den Controllern ist praktisch und funktioniert sehr gut. Insgesamt eine super Lösung und sieht auch super aus!
   

10. Vanessa Winchester Verified Buyer – 14 March 2025

    Best purchase very functional. Wish I would have bought sooner. Looks amazing. I’m
    

11. t0winsto Verified Buyer – 18 March 2025

    Bought this for my son’s PS5 to keep it looking nice. Stand is sturdy and charges the controllers. I saw lots to choose from online and this ended up working awesome!
    

12. jeffrey osifo Verified Buyer – 21 March 2025

    I use this product for my PS5 and it work perfectly very nice
    

13. Garrison Verified Buyer – 24 March 2025

    Screws are not the best but hold the platform and the charge station works great
    

14. Anonymous Verified Buyer – 10 April 2025

    Quality product. Quite sturdy using only the supplied drywall anchors. PS5 DualSense Edge controller users: Like 99% of controller docks, this one doesn’t work by default. That said; I opened it up and determined the plastic to be thick enough to do make this work (though I do not take responsibility if you damage your unit): 1. Set DualSense Edge in the dock lined up with the aux-in port (which should be long enough to help you center it). Mark where the front edge of the L3,R3 “function” buttons are making contact with the dock and preventing the controller from seating on the charge pins. 2. Use a dual purpose (flat-round profile) needle nose file to remove ~1-2mm of plastic from the marked spot, tapering it in towards the base. If you do this right and use a soft touch it will look factory mint (or at least close) and the plastic is quite easily filed. (see image) I should have taken a picture with the charging base open, but the worst damage you will do is blow a small hole in the plastic if you stick to the side edges. Stop and test fit at regular intervals and stop when the controller seats well and charges so you don’t blow a hole through the plastic inadvertently. The only electronics in the immediate area is a small square circuit board no bigger than the charging pin base is wide sitting right below the pins, the rest is structural bracing (plastic) and open space (air). I am ecstatic to get my DualSense Edge (and its case) off my desk, in order to embrace a simpler, more organized workspace (and life).

    

15. Leslie Hancock Verified Buyer – 11 April 2025

    Love thi set up for my ps5. Saves space!